Why Green Screens Are Green (and Used to Be Blue)

Why Green Screens Are Green (and Used to Be Blue)

by Julio Song

In 1940, "The Thief of Bagdad" filmed its effects against a blue backdrop. In 1959, "Ben-Hur" did the same for its chariot race. For about half a century the trick backdrop of cinema was blue, and "blue screen" was the name of the whole technique.

Today the studio backdrop is green, the YouTuber's pop-up backdrop is green, and the phrase everyone uses is "green screen". The colour changed because the camera changed. Film liked blue. Digital sensors like green, and the reason is written into a patent that Kodak filed in 1975.

What the screen is for

The job is called matting. You film an actor in front of a flat colour, then tell a machine: everywhere you see that colour, show me a different picture instead. The result is a matte, a map of which parts of the frame to keep. In digital work that map is the alpha channel, the same idea behind every transparent PNG.

So the backdrop colour has one requirement. It has to be a colour the actor is not.

Human skin settles most of that. In a 1996 SIGGRAPH paper called "Blue Screen Matting", Alvy Ray Smith and James Blinn noted that flesh of every tone tends to keep the same ratio of primaries: roughly twice as much red as green or blue. Red is the strongest colour in every face, which rules out a red screen. That leaves blue and green, and for most of film history blue won.

Why film picked blue

The trick is older than colour film. The Dunning process, used on "King Kong" in 1933, lit the actors in yellow and the background in strong blue, then used the difference to combine two black-and-white images. When three-strip Technicolor arrived, the blue backing came along.

The first big colour showcase was "The Thief of Bagdad" in 1940. The film won three Academy Awards at the 1941 ceremony, including Special Effects, with the photographic effects credited to Lawrence Butler. RedShark News names it as the first film to use blue screen.

Blue had two things going for it. It sits far from skin tones. And in the Technicolor process the blue record had the smallest grain, according to Lensrentals' history of the technique, so a matte pulled from it had cleaner edges.

Those edges were still a problem. Early blue screen shots had a thin blue line around the actors, and anything see-through was a mess. A later patent described the older methods as "incapable of reproducing correctly foreground objects of a partially transparent nature". Smoke, glass and loose hair either turned solid or vanished.

The man who fixed the fringe

That patent belonged to Petro Vlahos, an engineer whose work was assigned to the Motion Picture Research Council. He filed it on April 2, 1959, under the plain title "Composite Color Photography". His fix was introduced for the chariot race in "Ben-Hur", released the same year.

Vlahos had noticed something about real objects. In most things you point a camera at, the blue value and the green value sit close together. In skin they are about equal, and in anything grey they are equal by definition. Blue is rarely much stronger than green. A blue screen is the exception, with lots of blue and almost no green. So he stopped asking "is this pixel blue?" and asked "how much more blue than green is it?" His patent builds a "color difference mask" from the blue record minus the green record.

That one subtraction handled the hard cases. A wisp of smoke in front of the screen is a little more blue than green, so it becomes a little transparent, which is correct. Smith and Blinn later wrote the rule as a short formula and named the idea behind it the Vlahos Assumption. They also proved something awkward about it: pulling a perfect matte from a single image is mathematically impossible in the general case. There are more unknowns than equations. Every green screen shot you have ever seen works because of constraints like the one Vlahos spotted, plus an artist adjusting the controls until it looks right.

The Academy gave Vlahos a lifetime achievement award in 1995, shared with his son Paul. By then his method had moved from film labs into an electronic box called the Ultimatte, and Smith and Blinn noted that the most recent of the original blue screen patents expired in July 1995. Software keyers followed. When he died in 2013, aged 96, RedShark News wrote that every modern keyer was "rooted in Vlahos' principles".

The yellow screen that beat them both

Vlahos had a second idea, and on paper it was the better one.

In May 1958, almost a year before the blue screen patent, he filed another one: "Composite Photography Utilizing Sodium Vapor Illumination". The backing was a plain, uncoloured screen lit by sodium vapour lamps, a cousin of the lamps that once gave streetlights their orange glow. Those lamps give off light in an extremely narrow band of yellow, at about 589 nanometres. Inside the camera, a beam splitter sent that sliver of yellow to one strip of film and everything else to another. One strip recorded the actor. The other recorded the matte, at the same instant, through the same lens.

A risograph illustration of a faceted crystal on a rock splitting incoming light into a narrow amber beam and a broad pale beam

Because the yellow band was so narrow, the foreground could be lit with ordinary light. The patent says "almost any kind of light, including white" will do, so long as it stays out of that one sliver of yellow. It promised "accurate fitting of the action images into the background of the composite, without borders", and semi-transparent objects came through because the backing light passing through them still reached the matte film.

Disney used it for "Mary Poppins" in 1964. In 1965, Vlahos, Ub Iwerks and Wadsworth Pohl shared an Oscar for the technique.

So why isn't every studio painted sodium yellow? The process needed a special beam-splitting camera, and Lensrentals' history says Disney had the only prism. Blue screen ran through an ordinary camera, and the cheaper method won.

The idea did not die, though. At SIGGRAPH 2024, Paul Debevec and Nikolas Pueringer showed a rebuild of the sodium process made from off-the-shelf parts: two digital cinema cameras, a beam splitter, low-pressure sodium lamps and a set of filters.

Then the sensor changed its mind

Blue screens stayed common until the 1990s. Smith and Blinn, writing in 1996, already described the backing as usually blue but "increasingly" green. What happened in between was the digital camera.

A digital sensor is colour blind. Each tiny light-sensitive element measures brightness only. To get colour, manufacturers lay a mosaic of red, green and blue filters over the sensor, one filter per element, and software fills in the gaps. The standard mosaic is the Bayer pattern, patented by Bryce Bayer of Eastman Kodak. He filed on March 5, 1975, and the patent was granted on July 20, 1976.

Bayer did not split the colours evenly. Green filters sit at every other position, so they "occur at half of the element positions of the array". Red and blue get a quarter each.

A risograph illustration of a meadow laid out as a patchwork of square plots, with green grass in most squares and red poppies and blue cornflowers in the rest

His reasoning was about eyes, not cameras. People see fine detail mostly through brightness, and green carries most of the brightness. In the patent's words, "Luminance detail, to which the human eye is most responsive, is sampled by the largest population of elements". The HDTV standard, ITU-R BT.709, puts numbers on it. When it computes the brightness of a pixel, green counts for 71.52 percent, red for 21.26 percent and blue for 7.22 percent.

Put those two facts together and the backdrop choice flips. On a Bayer sensor the green channel has twice the samples of the blue channel, and it is the cleanest of the three. A matte is only as sharp as the channel you pull it from. On film, that was blue. On a digital sensor, it is green.

Green is also cheaper to light. A green backdrop reflects more light than a blue one, so it needs fewer lamps to expose properly. And bright green is rare in wardrobe, while blue is everywhere, starting with jeans.

Blue never left

Green's brightness cuts both ways. A bright backdrop bounces light back onto the actor, and that light is green. Compositors call it spill, and removing it from hair, mesh and shiny metal is slow work.

So blue screens are still in use. PremiumBeat's production guide lists the usual cases: night scenes, where reflected green light makes the subject look too bright; blonde hair, which keys badly against green; and any costume that is green itself. Vlahos's own patent carried the mirror-image warning for blue backings: "brilliant blues and violets should be avoided in the foreground".

The rule has not changed since 1940. Pick the colour your subject is not. It's why a weather presenter in a green tie ends up with a strip of forecast map down their chest.

What comes after green

The newest stages have no coloured backdrop at all. For the first season of "The Mandalorian", Industrial Light & Magic built a set walled with LED screens: 75 feet across, covering about 270 degrees, with a 20-foot-high video wall running into the ceiling, according to Computer Graphics World. The background plays on the wall while the camera rolls.

More than half of that season was shot this way, and the hero's helmet is a big part of why. A mirror-polished helmet on a green stage reflects green, and that green has to be painted out of nearly every shot. On the LED stage it reflected the scene on the walls. ILM's Jason Porter told the magazine, "In 90 percent of the shots there were no fixes."

Others are still improving the coloured screen. In 2023 a Netflix team that included Debevec published "Magenta Green Screen". They film the actor in front of a green backing but light the actor only with red and blue, which together make magenta. The green channel then holds nothing except the backdrop, so it works as a ready-made matte. A machine learning model, trained on footage of the same actor under white light, puts the missing green back into the foreground.

It is Vlahos's sodium trick again in a different colour: give the matte its own slice of the spectrum and keep the actor out of it. The slice has moved from blue to yellow to green, each time because of what the camera of the day could separate most cleanly. If you want to see the split for yourself, pull a photo apart into its red, green and blue channels and compare the noise in each.

Sources